HYDROSEAL

Hydroseal® : very special fluids

The products in the HYDROSEAL® range are gasoil-type aliphatic hydrocarbon solvants.

Low aromatics products

A range developed in line with TOTAL's commitment to offer products with toxicological and ecotoxicological levels lower than regulatory requirements.

These products have a very low aromatic content, typically less than 100 ppm. In addition they offer excellent thermal stability, are UV resistant, have a low odour, a high flash point and a high viscosity.

They are also classified as biodegradable against the OECD 301F standard.

Applications

Typical applications include :

HYDROSEAL G 250 H : A wide cut fraction with a flash point of 124°C, used for electric-discharge machining.

HYDROSEAL G 232 H : A narrow cut fraction with a flash point of 103°C, used in degreasing, material lubrication and electro-discharge machining.

HYDROSEAL G 240 H : With a flash point of 112°C, mainly used in the Lubricants Industry.

HYDROSEAL G 3 H : With a flash point of 135°C combined with a high viscosity this fluid is specifically recommended for use in the textile industry in the coating of fibres.

HYDROSEAL G 400 H : With a flash point of 158°C and a high viscosity this fluid has performance similar to that of the light oils traditionally used in the Lubricant Industry. It is specifically recommended for use in metal and textile processing.

• Technical characteristics for the Hydroseal® range